转换器，用于 Pt 100 探头 DIP 开关调整装配。
20 mA 时，具有 0 至 10 V 输出或 0 (4)。
外部电源电压绝缘。
紧凑型，用于安装到 6.2 mm 厚 DIN 导轨上。
与螺钉或端子连接器 (-SP) 连接。
Use this transducer from Phoenix Contact to convert an input signal from a Pt 100 temperature sensor to a 4-20 mA output. This standard signal is a convenient way to create an interface with industrial equipment such as your programmable logic controller (PLC).
The product is suitable for use with data loggers in monitoring or process control applications. It has configurable inputs and outputs, which are set using dual in-line packaging (DIP) switches. This manual programming means there's no need for software control panels. Its compact design takes up minimal space on a printed circuit board.
Thanks to its wide measuring range of -50°C to +200°C, this is a versatile choice. It features a light-emitting diode (LED) to warn you clearly of errors. Its DIN rail mounting is sturdy and stands up well to the demands of challenging factory environments.
• Operating temperature range of -20°C to +65°C
• Output range of 0 V to 10 V and 0 mA to 20 mA
• Analogue output type
• Supply voltage of 24 V DC
| 属性 | 数值 |
|---|---|
| 模块类型 | 温度转换器 |
| 输入信号类型 | RTD |
| 输出信号类型 | 电流，电压 |
| 电源电压 | 24V 直流 |
| 输入范围 | -50 → 200°C |
| 输出范围 | 0 → 10 V, 0 → 20mA |
| 安装类型 | DIN 卡轨安装 |
| 工作温度范围 | -20 → +65°C |
